Licence to Operate a Non-Slewing Mobile Crane (CN) - over 3 tonnes

Licence to Operate a Non-Slewing Mobile Crane (CN 3+ tonne) - TLILIC0040

Develop the Skills and Confidence to Safely Operate Non-Slewing Mobile Cranes

Introduction

The Licence to Operate a Non-Slewing Mobile Crane (CN 3+ tonne - TLILIC0040) course provides you with the practical skills and confidence to safely operate non-slewing mobile cranes. Through hands-on training, you’ll gain experience in crane setup, load planning, lifting operations, and shutdown procedures, while learning correct operating techniques, hazard identification, risk assessment, and safe work practices - all in realistic, workplace-focused scenarios.

This nationally recognised qualification is perfect for anyone in construction, resources, transport, or logistics industries looking to develop or formalise crane operating skills. With crane operators in high demand, this course will prepare you to perform lifting operations safely, efficiently, and in full compliance with workplace regulations.

Course Delivery: Face-to-Face training
Duration: 4 days
Outcome: Nationally-recognised Statement of Attainment
Locations: 15+ training centres across Queensland and Western Australia
Course Fee: Fees vary depending on location (see table below)
Funding: CTF Funding available

Licence to Operate a Non-Slewing Mobile Crane (CN 3+ tonne capacity) - Course Information

Course Overview

The Licence to Operate a Non-Slewing Mobile Crane (CN) course takes you beyond theory, providing hands-on training in all aspects of non-slewing mobile crane operations. You’ll learn to safely plan lifts, inspect equipment, coordinate with team members, and manage loads under real-world conditions. Emphasis is placed on practical decision-making, hazard control, and workplace compliance, ensuring you can operate confidently and efficiently on site.

By the end of the program, you’ll be ready to perform crane operations independently, apply safe lifting practices, and meet all legislative and workplace requirements. You’ll learn about:

• Legislation & Compliance: Understand WHS requirements, licensing obligations, and workplace safety standards for crane operations.
• Crane Operation: Safely operate non-slewing mobile cranes, control loads, and manage hazards. Non-slewing mobile cranes include articulated mobile cranes and locomotive cranes, but do not include vehicle tow trucks.
• Legislation & Compliance: Understand WHS requirements, licensing obligations, and workplace safety standards for crane operations.
• Pre-Operational Checks: Inspect cranes, lifting gear, and site conditions to ensure everything is ready for safe operations.
• Load Planning & Calculation: Estimate load weights, select appropriate lifting gear, and plan lifts in accordance with safe work procedures.
• Load Movement: Precisely manoeuvre loads using correct lifting techniques and clear communication signals.
• Post-Operational Procedures: Secure, shut down, and inspect the crane after use to maintain safety and equipment integrity.
• Communication & Teamwork: Coordinate effectively with doggers, riggers, and site personnel to ensure safe lifting operations.
• Emergency Procedures: Respond appropriately to unexpected incidents, such as equipment faults or load instability.

By the end of the course, you’ll be confident operating non-slewing cranes safely, managing risks, and ensuring compliance with workplace and industry standards.
 

Delivery & Assessment

Due to the high-risk nature of crane operation, the Licence to Operate a Non-Slewing Mobile Crane (CN) course is delivered face-to-face over four full days. You’ll gain hands-on experience in a controlled environment, building both confidence and competence while receiving direct guidance and personalised feedback from experienced trainers throughout the course.

High Risk Work Licences

After successfully completing this course, you can apply for your High Risk Work Licence (HRWL). HRWLs are valid for five years and can be applied for or renewed online via the WorkSafe QLD or WorkSafe WA websites. If your licence expires, you are no longer recognised as a licensed operator until it is renewed. WorkSafe provides a 12-month grace period for renewal; if this period passes, you will need to resit both the written and practical assessments.

You have 60 days from course completion to submit your application. If you prefer, we can apply for the licence on your behalf for an additional fee of $100.
 

Who Should Complete This Course?

This course is ideal for individuals who are:

• Entering or currently working in construction, resources, transport, or logistics industries
• Required to hold a High Risk Work Licence (CN class) to operate a non-slewing mobile crane
• Looking to formalise existing on-the-job experience or progress into higher crane classes (C2, C6, C1, CO)

Whether you’re advancing your career or expanding your skill set, this course provides the practical skills and knowledge needed to safely operate non-slewing mobile cranes.
 

Entry Requirements

You must satisfy each of the following criteria to enrol in this course:

• You must be at least 18 years old (a requirement for High Risk Work Licences).
• Wear steel-capped or safety boots to your session and PPE.
• Basic computer skills and internet access (for enrolment and communication).
• Sufficient language, literacy, and numeracy (LLN) skills to complete assessments.
• A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.

Funding is Available For this Course

Construction Training Fund (CTF - WA)
Eligible apprentices, trainees, workers and business owners in WA’s building and construction industry can save up to 70% per course (metro) and 80% per course (regional) with CTF funding. As an approved bulk billing provider, we handle the paperwork and claim process for you - so you only pay the gap while you upskill, get licences, and complete safety courses. Check your eligibility or contact us for more information.
 

Support When You Need It

Throughout the duration of your course, you can access experienced industry professionals and support staff to guide you through the program. Our trainers are dedicated to helping you succeed and will be available to answer your questions and provide feedback on your progress. They will provide you with the guidance and support you need to fully understand the course material, as well as offer suggestions for further learning opportunities.
 

Career Opportunities

Related Courses to Further Your Career

Licence to Operate a Slewing Mobile Crane (C2 up to 20 tonne)
Licence to Perform Dogging
Licence to Perform Rigging (Intermediate)

Career Pathways

Completing the Licence to Operate a Non-Slewing Mobile Crane (CN) course opens up a range of career opportunities across multiple industries such as:

• Construction and Civil Works: Crane operator, dogman/rigger, site supervisor, maintenance technician, project foreperson
• Mining and Resources: Plant operator, high-risk work coordinator, maintenance support, rigging team member
• Building Services & Maintenance: Facilities maintenance technician, access systems operator, facilities safety officer, industrial maintenance worker
• Events & Infrastructure: Stage rigger, crane signal operator, event setup coordinator, lighting or AV technician

By gaining this qualification, you’ll be prepared to take on greater responsibility, safely manage crane lifting operations, and contribute to workplace efficiency and compliance, providing a strong foundation for career growth in high-risk work settings.

Testimonial

The crane course was very practical and hands-on. The trainer made sure everyone understood each step before moving on. I left feeling confident and fully prepared for the licence assessment.” - Mark
 

Frequently Asked Questions (FAQs)

How much does the Licence to Operate a Non-Slewing Mobile Crane (CN) - TLILIC0040 course cost?
Fees vary depending on location - you can view specific location fees in the table below.

Is funding available for the Licence to Operate a Non-Slewing Mobile Crane (CN) - TLILIC0040 course?
Yes - you may be eligible for CTF (WA) subsidies for this course. Check your eligibility or contact us to find out more.

How long does it take to complete the Licence to Operate a Non-Slewing Mobile Crane (CN) - TLILIC0040 course?
This course is delivered face-to-face over 4 days.

Are there any entry requirements for the Licence to Operate a Non-Slewing Mobile Crane (CN) - TLILIC0040 course?
Yes, you must satisfy each of the following criteria to enrol in this course:
- Must be at least 18 years old
- Wear steel-capped or safety boots to your session and PPE
- Basic computer skills and internet access (for enrolment and communication)
- Sufficient language, literacy, and numeracy (LLN) skills to complete assessments
- A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.

How do I apply for the High Risk Work Licence?
After successfully completing this course, you can apply for your High Risk Work Licence (HRWL) through WorkSafe QLD or WA. You have 60 days from course completion to submit your application. If you prefer, we can apply for the licence on your behalf for an additional fee of $100.

When will I receive my Statement of Attainment (SOA)?
Your SOA will be issued within 3-5 business days of successfully completing the course and receiving payment.

Have Questions?

Our friendly support team is here to help. Whether you need course advice, enrolment support, or guidance during your training, we’re only a call or message away.

1300 248 457 | info@civilsafety.edu.au