Licence to Operate a Slewing Mobile Crane (C1) - up to 100 tonnes

Licence to Operate a Slewing Mobile Crane (C1 - up to 100 tonne) - TLILIC0021

Gain the high-level skills required to operate slewing cranes up to 100 tonnes

Introduction

The Licence to Operate a Slewing Mobile Crane (C1 - up to 100 tonne) course provides comprehensive training in the safe and effective operation of larger slewing cranes used across major construction, mining and heavy-industry sites. Throughout the course, you’ll develop skills in lift planning, crane setup, load estimation, boom and counterweight configuration, operational safety, signalling and complex lifting procedures. You’ll work through real-world lifting scenarios to build your confidence and competence in high-risk environments.

This nationally recognised qualification is ideal for operators progressing from smaller crane classes and looking to take the next step into higher-capacity crane operations.

Course Delivery: Face-to-Face training
Duration: 5 days
Outcome: Nationally-recognised Statement of Attainment
Locations: 15+ training centres across Queensland and Western Australia
Course Fee: Fees vary depending on location (see table below)
Funding: CTF Funding available

Licence to Operate a Non-Slewing Mobile Crane (C1 up to 100 tonne capacity) - Course Information

Course Overview

The Licence to Operate a Slewing Mobile Crane (C1) course is designed for operators progressing into high-capacity crane operations. You’ll gain practical training in planning and executing complex lifts using slewing cranes with a capacity of up to 100 tonnes.

This course focuses on advanced crane setup, operational control, risk management, and compliance - skills essential for large-scale construction and industrial lifting environments. You’ll learn about:

• Legislation & Compliance: High-capacity crane WHS requirements, licensing obligations, and workplace safety standards.
• Advanced Crane Setup: Assessing ground conditions, configuring counterweights, deploying outriggers, and preparing the crane for high-load tasks.
• Pre-Operational Safety Checks: Inspecting structural elements, hydraulic systems, boom configurations, and rigging equipment.
• Load Chart Mastery: Interpreting advanced operating limits, dynamic loading, radius limitations, and boom configurations for heavy lifts.
• Crane Operation: Executing safe crane movements - precise slewing, telescoping, hoisting, and placing heavy loads under controlled conditions.
• Complex Lift Execution: Performing intricate lifts including high-radius lifts, blind lifts, and lifts with challenging environmental or structural constraints.
• Post-Operational Shutdown: Completing thorough shutdown, inspections, and crane securing procedures.
• Team Coordination: Working seamlessly with lifting teams, riggers, signalers, and supervisors during high-risk operations.
• Emergency Procedures: Responding to critical incidents such as hydraulic failures, unforeseen load movement, or structural hazards.

By the end of the course, you'll be ready to operate slewing cranes up to 100 tonnes safely, efficiently, and in line with all industry and legislative requirements.

Delivery & Assessment

Due to the high-risk nature of crane operation, the Licence to Operate a Slewing Mobile Crane (C1) course is delivered face-to-face over five full days. You’ll gain hands-on experience in a controlled environment, building both confidence and competence while receiving direct guidance and personalised feedback from experienced trainers throughout the course.

High Risk Work Licences

After successfully completing this course, you can apply for your High Risk Work Licence (HRWL). HRWLs are valid for five years and can be applied for or renewed online via the WorkSafe QLD or WorkSafe WA websites. If your licence expires, you are no longer recognised as a licensed operator until it is renewed. WorkSafe provides a 12-month grace period for renewal; if this period passes, you will need to resit both the written and practical assessments.

You have 60 days from course completion to submit your application. If you prefer, we can apply for the licence on your behalf for an additional fee of $100.
 

Who Should Complete This Course?

This course is ideal for individuals who are:

• Working in environments where large lifting operations are required, including major construction, mining, shutdowns, and heavy industrial projects
• Already holding a C6 licence (or equivalent experience) and progressing toward operating larger slewing cranes
• Required to hold a High Risk Work Licence (C1 class) to operate cranes up to 100 tonnes
• Seeking the skills, knowledge, and certification to manage complex lifts and coordinate safely with rigging and dogging teams

This course is a key step in advancing toward high-capacity crane operations, giving you the practical expertise needed for demanding lifting environments and preparing you for future progression into the CO class.

Entry Requirements

You must satisfy each of the following criteria to enrol in this course:

• You must be at least 18 years old (a requirement for High Risk Work Licences).
• Wear steel-capped or safety boots to your session and PPE.
• Basic computer skills and internet access (for enrolment and communication).
• Sufficient language, literacy, and numeracy (LLN) skills to complete assessments.
• A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.

Funding is Available For this Course

Construction Training Fund (CTF - WA)
Eligible apprentices, trainees, workers and business owners in WA’s building and construction industry can save up to 70% per course (metro) and 80% per course (regional) with CTF funding. As an approved bulk billing provider, we handle the paperwork and claim process for you - so you only pay the gap while you upskill, get licences, and complete safety courses. Check your eligibility or contact us for more information.

Support When You Need It

Throughout the duration of your course, you can access experienced industry professionals and support staff to guide you through the program. Our trainers are dedicated to helping you succeed and will be available to answer your questions and provide feedback on your progress. They will provide you with the guidance and support you need to fully understand the course material, as well as offer suggestions for further learning opportunities.
 

Career Opportunities

Related Courses to Further Your Career

Licence to Operate a Slewing Mobile Crane (CO - 100+ tonne)
Licence to Perform Dogging
Licence to Perform Rigging (Intermediate)

Career Pathways

Completing the C1 Slewing Mobile Crane course opens career opportunities in large-scale construction, mining, and industrial projects:

• Construction and Civil Works: Senior crane operator, site supervisor, project foreperson, rigging coordinator
• Mining and Resources: High-risk work coordinator, crane supervisor, plant operator
• Facilities Management and Maintenance: Maintenance supervisor, access systems coordinator, industrial maintenance team leader
• Events and Entertainment: Senior stage rigger, crane signal supervisor, heavy-lift event operator

This course prepares you to manage complex lifting tasks, supervise teams, and perform high-capacity crane operations safely and efficiently.

Testimonial

“Operating a 100-tonne crane seemed intimidating at first, but the course broke it down step by step. I now feel capable and confident." - Finn
 

Frequently Asked Questions (FAQs)

How much does the Licence to Operate a Slewing Mobile Crane (C1 - up to 100 tonne capacity) - TLILIC0021 course cost?
Fees vary depending on location - you can view specific location fees in the table below.

Is funding available for the Licence to Operate a Slewing Mobile Crane (C1 - up to 100 tonne capacity) - TLILIC0021 course?
Yes - you may be eligible for CTF (WA) subsidies for this course. Check your eligibility or contact us to find out more.

How long does it take to complete the Licence to Operate a Slewing Mobile Crane (C1 - up to 100 tonne capacity) - TLILIC0021 course?
This course is delivered face-to-face over 5 days.

Are there any entry requirements for the Licence to Operate a Slewing Mobile Crane (C1 - up to 100 tonne capacity) - TLILIC0021 course?
Yes, you must satisfy each of the following criteria to enrol in this course:

• Must be at least 18 years old
• Wear steel-capped or safety boots to your session and PPE
• Basic computer skills and internet access (for enrolment and communication)
• Sufficient language, literacy, and numeracy (LLN) skills to complete assessments
• A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.

How do I apply for the High Risk Work Licence?
After successfully completing this course, you can apply for your High Risk Work Licence (HRWL) through WorkSafe QLD or WA. You have 60 days from course completion to submit your application. If you prefer, we can apply for the licence on your behalf for an additional fee of $100.

When will I receive my Statement of Attainment (SOA)?
Your SOA will be issued within 3-5 business days of successfully completing the course and receiving payment.

Have Questions?

Our friendly support team is here to help. Whether you need course advice, enrolment support, or guidance during your training, we’re only a call or message away.

1300 248 457 | info@civilsafety.edu.au