Licence to Operate a Slewing Mobile Crane (C6) - up to 60 tonnes

Licence to Operate a Slewing Mobile Crane (C6 - up to 60 tonne) - TLILIC0023

Build the skills to operate 60-tonne slewing cranes safely and confidently

Introduction

The Licence to Operate a Slewing Mobile Crane (C6 - up to 60 tonne) course teaches you the practical skills and theoretical knowledge required to safely operate mid-range slewing cranes used across construction, mining, maintenance and industrial sites. During this course, you’ll learn how to conduct crane inspections, assess lift requirements, configure lifting equipment, follow load charts, manage risks, and operate the crane to lift, move and position loads safely and efficiently. You’ll also practise effective communication and signalling, along with emergency and shutdown procedures.

This nationally recognised qualification is perfect for operators wanting to broaden their capabilities and take on more complex crane tasks within a wide range of industries.

Course Delivery: Face-to-Face training
Duration: 5 days
Outcome: Nationally-recognised Statement of Attainment
Locations: 15+ training centres across Queensland and Western Australia
Course Fee: Fees vary depending on location (see table below)
Funding: CTF Funding available

Licence to Operate a Slewing Mobile Crane (C6 up to 60 tonne capacity) - Course Information

Course Overview

The Licence to Operate a Slewing Mobile Crane (C6) course builds on foundational crane skills and prepares you to operate larger, more complex slewing cranes up to 60 tonnes. This hands-on program teaches you advanced load handling, boom control, lift planning, and risk management required for medium-capacity crane operations.

By completing this course, you’ll be equipped to take on more demanding lifting roles across construction, mining, maintenance, and industrial environments. You’ll learn about:

• Legislation & Compliance: Advanced WHS obligations, HRWL requirements, and industry standards for medium-capacity slewing cranes.
• Crane Setup & Configuration: Selecting setup locations, deploying outriggers, configuring crane modes, and interpreting site conditions.
• Detailed Pre-Operational Checks: Assessing boom systems, counterweights, slew bearings, rigging gear, and crane integrity.
• Load Chart Analysis: Working with multi-configuration load charts, operating envelopes, and complex lift parameters.
• Crane Operation: Operating slewing cranes safely - precision boom extension, slew coordination, hoisting, and safe load placement.
• Complex Load Movement: Performing multi-directional lifts, dual-crane communication, and managing dynamic loads.
• Post-Operational Procedures: Completing shutdown procedures, load gear inspections, and securing the crane for transport or storage.
• Communication & Team Coordination: Working closely with riggers, doggers, supervisors, and spotters during complex lifting tasks.
• Emergency Response: Managing failures, environmental risks, and unexpected load behaviours during operational tasks.

By the end of the course, you’ll be prepared to operate a 60-tonne slewing mobile crane safely and confidently while meeting all legislative and workplace safety requirements.
 

Delivery & Assessment

Due to the high-risk nature of crane operation, the Licence to Operate a Slewing Mobile Crane (C6) course is delivered face-to-face over five full days. You’ll gain hands-on experience in a controlled environment, building both confidence and competence while receiving direct guidance and personalised feedback from experienced trainers throughout the course.

High Risk Work Licences

After successfully completing this course, you can apply for your High Risk Work Licence (HRWL). HRWLs are valid for five years and can be applied for or renewed online via the WorkSafe QLD or WorkSafe WA websites. If your licence expires, you are no longer recognised as a licensed operator until it is renewed. WorkSafe provides a 12-month grace period for renewal; if this period passes, you will need to resit both the written and practical assessments.

You have 60 days from course completion to submit your application. If you prefer, we can apply for the licence on your behalf for an additional fee of $100.
 

Who Should Complete This Course?

This course is ideal for individuals who are:

• Currently working as a CN or C2 operator and ready to progress into larger, more complex crane operations
• Required to operate a slewing mobile crane up to 60 tonnes across construction, civil infrastructure, mining, or heavy industry
• Looking to expand their lifting capacity and career opportunities toward higher crane classes (C1 and CO)
• Seeking to formalise on-the-job crane experience with a nationally recognised High Risk Work Licence

If you’re aiming to take on bigger projects and more advanced lifting tasks, this course gives you the operational capability, compliance knowledge, and practical confidence needed to operate 60-tonne slewing cranes safely and effectively.

Entry Requirements

You must satisfy each of the following criteria to enrol in this course:

• You must be at least 18 years old (a requirement for High Risk Work Licences).
• Wear steel-capped or safety boots to your session and PPE.
• Basic computer skills and internet access (for enrolment and communication).
• Sufficient language, literacy, and numeracy (LLN) skills to complete assessments.
• A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.

Funding is Available For this Course

Construction Training Fund (CTF - WA)
Eligible apprentices, trainees, workers and business owners in WA’s building and construction industry can save up to 70% per course (metro) and 80% per course (regional) with CTF funding. As an approved bulk billing provider, we handle the paperwork and claim process for you - so you only pay the gap while you upskill, get licences, and complete safety courses. Check your eligibility or contact us for more information.

Support When You Need It

Throughout the duration of your course, you can access experienced industry professionals and support staff to guide you through the program. Our trainers are dedicated to helping you succeed and will be available to answer your questions and provide feedback on your progress. They will provide you with the guidance and support you need to fully understand the course material, as well as offer suggestions for further learning opportunities.
 

Career Opportunities

Related Courses to Further Your Career

Licence to Operate a Slewing Mobile Crane (C1 - up to 100 tonne)
Licence to Operate a Slewing Mobile Crane (CO - 100+ tonne)
Licence to Operate a Vehicle Loading Crane (CV - 10+ tonne) 

Career Pathways

Completing the C6 Slewing Mobile Crane course prepares you for advanced lifting operations across construction, mining, industrial, and infrastructure projects:

• Construction and Civil Works: Crane operator, site supervisor, project foreperson, rigging team member
• Mining and Resources: High-risk work coordinator, plant operator, rigging supervisor
• Facilities Management and Maintenance: Maintenance supervisor, access systems coordinator, facilities safety officer
• Events and Entertainment: Senior stage rigger, crane signal operator, event infrastructure coordinator

By completing this course, you’ll be ready to take on larger lifts, coordinate teams safely, and progress toward high-capacity crane operations.

Testimonial

“This course pushed me to a higher level. Managing bigger loads and coordinating with the team was challenging but rewarding." - Ashton
 

Frequently Asked Questions (FAQs)

How much does the Licence to Operate a Slewing Mobile Crane (C6 - up to 60 tonne capacity) - TLILIC0023 course cost?
Fees vary depending on location - you can view specific location fees in the table below.

Is funding available for the Licence to Operate a Slewing Mobile Crane (C6 - up to 60 tonne capacity) - TLILIC0023 course?
Yes - you may be eligible for CTF (WA) subsidies for this course. Check your eligibility or contact us to find out more.

How long does it take to complete the Licence to Operate a Slewing Mobile Crane (C6 - up to 60 tonne capacity) - TLILIC0023 course?
This course is delivered face-to-face over 5 days.

Are there any entry requirements for the Licence to Operate a Slewing Mobile Crane (C6 - up to 60 tonne capacity) - TLILIC0023 course?
Yes, you must satisfy each of the following criteria to enrol in this course:

• Must be at least 18 years old
• Wear steel-capped or safety boots to your session and PPE
• Basic computer skills and internet access (for enrolment and communication)
• Sufficient language, literacy, and numeracy (LLN) skills to complete assessments
• A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.

How do I apply for the High Risk Work Licence?
After successfully completing this course, you can apply for your High Risk Work Licence (HRWL) through WorkSafe QLD or WA. You have 60 days from course completion to submit your application. If you prefer, we can apply for the licence on your behalf for an additional fee of $100.

When will I receive my Statement of Attainment (SOA)?
Your SOA will be issued within 3-5 business days of successfully completing the course and receiving payment.

Have Questions?

Our friendly support team is here to help. Whether you need course advice, enrolment support, or guidance during your training, we’re only a call or message away.

1300 248 457 | info@civilsafety.edu.au